|   Email : info@labelingmachine.in  
Manufacturer and Exporter of Semi Automatic Labeling Equipment, Fully Automatic Labelling System, Label Printing Machine, Labeler Machinery, Filler Machines, Filling Equipment, Double Side Labeling Machine from India Om Bhagwati Labelling Technologies – Machinery for Labelling.

Labeling Machinery

Labeling Machinery

Auger Powder Filler Machine

Product Specification :

Automatic Auger Type Dry Syrup Powder Filling Machine is a compact model used for filling Dry Syrup Powder in bottles.

The incoming dry bottle sterilized is fed through the in feed Turn Table with suitably guided on the moving delrin flat conveyor belt at the required speed for feeding. There are two separate filling head mounted on machine top plate in the same line. When bottle reaches to the first filling station, it will be held by the pneumatic bottle holder. Immediately it will be sensed by the bottle sensor as soon as it gets signals from sensor magnetic clutch starts to rotate which is mounted on auger shaft. It will fill the desired amount of powder to the bottle through auger, where rotation time is previously saved in PLC control. After filling of first bottle pneumatic piston goes back and release the first bottle to move on conveyor, By the same time second bottle also moves along with the first bottle in empty condition. In second filling head same operation will be performed but this time second bottle get filled and first bottle moves further for next operation. The main advantage of this machine is Pneumatic bottle holding system is directly connected with Auger rotation, so till bottle get filled with powder as per set value pneumatic system will not going to release the bottle.


Automatic Auger Powder Filler Machine

Silent Features :

  • Total Compact c GMP model.
  • All parts and assemblies coming in contact with powder and rubber stopper are made of S.S.316 and easily removable for mandatory Autoclaving/ Sterilization.
  • "NO BOTTLE, NO FILL" System eliminates wastage of costly powder.
  • Conveyor driving is through High quality imported Gear motor 
  • Machine speed can be adjusted by A.C. Frequency drive, which is time saving.
  • Machine is provided with delrin conveyor belt to avoid sticking of vial on conveyor.
  • Single track bottle movement, reduces setting of supporting guide rails and semi skilled person can also easily operate the machine.
  • Pneumatic bottle holding system is connected with auger rotation, which eliminates chances of bottle transfer before completion of filling operation.
  • No change parts are required for any change in bottle diameter from 30 to 120 ml.
  • Imported Gear Motor for Conveyor drive.
  • A.C. Frequency drive for Conveyor drive.
  • "No Bottle, No Filling" System.
  • Pneumatic bottle holding system.


Technical Details :  

Model

SBAF-60

SBAF-D-100

Direction

Left To Right.

Left To Right.

Production Rate

Up to 30 to 40 Bottles / Min

Up to 60 to 80 Bottles / Min.

Fill Capacity

10 grms to 50 grms. (with different set of Auger and funnel) Fill range depending upon Bottle opening and bulk density of powder.

10 grms to 50 grms. (with different set of Auger and funnel) Fill range depending upon Bottle opening and bulk density of powder.

Accuracy

± 2% depending upon consistency and the Uniformity of bulk density of powder under controlled level of Humidity (i.e.35%)

± 2% depending upon consistency and the Uniformity of bulk density of powder under controlled level of Humidity (i.e.35%)

No. of Heads

Single

Two

Electrical Supply

1.00 HP For Main Drive.
0.25 HP for conveyor

2.00 HP For Main Drive.
0.25 HP for conveyor

Power Requirement

440 Volts, 3 Phase (4 wire System) 50 Hz.

440 Volts, 3 Phase (4 wire System) 50 Hz.

Height of Conveyor

Adjustable from 850 To 900 MM

Adjustable from 850 To 900 MM

Dimensions

1524 MM (L) X 1105 MM (W) X 1800 MM (H)

2200 MM (L) X 1102 MM (W) X 1817 MM (H)

Net Weight

400 KGS. (Approx.)

550 KGS. (Approx.)

Gross Weight

600 KGS. (Approx.)

800 KGS. (Approx.)

Bottle Diameter

25 MM To 70 MM MAX.

25 MM To 70 MM MAX.

Height

55 MM To 110 MM.

55 MM To 110 MM.

Pneumatic Air

Filtered, oil free, sterile low pressure AIR at 5 kg/cm2

Filtered, oil free, sterile low pressure AIR at 6 kg/cm2


Powder Filling and Powder Filler Machine

Automatic Single Head Auger Type Dry Syrup Powder Filling Machine is a compact model used
for filling of Dry Syrup Powder into bottle. The incoming dry bottle (sterilized and siliconised) are fed through the infeed Turn Table with suitably guided on the moving delrin flat conveyor belt at the required speed for feeding. Filling head is mounted on machine top plate. When bottle reaches to the filling station, it will be hold by the pneumatic bottle holder. Immediately it will be sensed by the bottle sensor as soon as it gets the signals from sensor magnetic clutch starts to rotate which is mounted on auger shaft. It will fill the desire amount of powder to the bottle through auger, where rotation time is previously saved in PLC control. After filling of bottle pneumatic piston goes back and release the bottle to move on conveyor. The main advantage of this machine is Pneumatic bottle holding system is directly connected with Auger rotation, so till bottle get filled with powder as per set value, pneumatic system will not going to release the bottle.

  • Total Compact cGMP model.
  • All parts and assemblies coming in contact with powder and rubber stopper are made of S.S.316 and easily removable for mandatory Autoclaving/ Sterilization.
  • “NO BOTTLE, NO FILL” System eliminates wastage of costly powder.
  • Conveyor driving is through High quality imported Gear motor 
  • Machine speed can be adjusted by A.C. Frequency drive, which is time saving.
  • Machine is provided with delrin conveyor belt to avoid sticking of vial on conveyor.
  • Pneumatic bottle holding system is connected with auger rotation, which eliminates
    chances of bottle transfer before completion of filling operation.
  • Total PLC control for the machine.
  • No change parts are required for any change in bottle diameter from 30 to 120 ml.
  • Imported Gear Motor for Conveyor drive.
  • A.C. Frequency drive for Conveyor drive.
  • “No Bottle, No Filling” System.
  • PLC control for machine.
  • Pneumatic bottle holding system.
Fully Automatic Powder Filling Machine, Powder Filler Machine

Powder Filler Machine

Salient Features :
  • Auger Filler Machine is very much suitable to pack detergent powder, coffee powder, Skimmed Milk Powder, Spices, Flour, Baking Power, Curry Powder, Besan, Henna, Pharmaceutical Powder, Talcum Powder etc.
  • Highly accurate weight based systems ensures high speed and less change over time.
  • Capability to handle wide range of products & pack sizes.
  • No Container No Fill system ensures no wastage of costly powder / material.
Fully Automatic Powder Filling Machine, Powder Filler Machine
 

Model

Capacity

Output/ Min

Size of Container / Pouch

Power Consumption

Electric Rating

Machine Dimension
(in MM)
(L X W X H)

Weight
(Kg)

MAF–1

5 gm to 100 gm

15 - 35

Dia / width
20 to 125 mm
Height
50 to 280 mm

440 / 220Volt/ three / single phase (4 wire system) 50Hz.

1 HP Motor

1000 X 750 X 1500

275

MAF-2

100 gm to 2 Kg.

5 - 15

Dia / width
20 to 125 mm
Height
50 to 280 mm

440 / 220Volt/ three / single phase (4 wire system) 50Hz.

1 HP Motor

1300 X 850 X 1650

325


TOP Automatic Induction Cap Sealing Machine>>
 
Home  |  Corporate Profile  |  Labelling Machinery   |  Contact Us  |  E-mail  |  Sitemap
 
Om Bhagwati Labelling Technologies. All rights reserved.